Problems that are prone to occur after artificial granite paving

1. The reason for the black seam is that the artificial granite has just been paved, and the caulking treatment is performed without waiting for the moisture in the mortar to evaporate. The best time for stitching is 12 days after artificial granite paving)

2. The reason for the hollowing is that the water content of the paved artificial granite mortar is too large, the sand and cement are not mixed uniformly, and the mud is thick and uneven. The artificial granite has a dense structure and low water absorption. The excess water under the artificial granite cannot migrate out of the surface of the granite. The cement shrinks quickly. People walk on the granite just after paving, which may cause the granite to become loose and hollow.

3. Causes of scratches and loss of light; artificial granite is not protected after paving, the debris is piled up in disorder, and the sand and stone hard objects scratch the surface of artificial granite. The assembly is scratched, scratched, and lost.

4. The reason for the fracture: there is no back mesh glue at the bottom of the artificial granite. Therefore, it is very brittle. When the builder beats it hard, the granite is easily beaten into dark cracks, the cement mortar at the bottom shrinks, and the cases are pulled into ranks and become broken (the reasons for the cracks are also caused by improper transportation, handling, placement, etc.) No cracks can be seen on the surface when it is not paved. After cement paving, the cement shrinks, and the cracks break obviously after a few days)

5. The reason for the bulge in the middle of the bulge is that the artificial granite is paved with strong alkaline cement, and the bottom of the artificial stone is corroded by the strong alkaline cement for about 3 mm. Because the artificial granite is not breathable, the groundwater gas migrates upward, and the water vapor Passing through the strong alkali corrosion layer, capping the artificial granite surface

DIAMOND HAND PAD BANNER of Expert Tips: Using Diamond Hand Pads for Polishing and Repairing Surfaces

-All diamond tools can be ordered and fabricated!
-Henry Wang | Quote Manager
-WhatsApp:+86-18030177538
-Email: Inquiry@zdiamondtools.com
-Web www.zdiamondtools.com