Precautions for rock slab cutting process, how to solve the problem of rock slab cutting edge collapse

As a new material, slate was born, with unique characteristics of slate, anti-fouling, heat-resistant, scratch-resistant, durable, UV light resistance, surface without secondary treatment, etc., has won the favor of the decoration industry, and is widely used in so or Kitchen countertops, background walls, etc., slate petroleum natural stone and inorganic clay are made by special process, vacuum extrusion molding and automatic closed computer temperature-controlled roller kiln firing at 1300 degrees, and it is also called "sintered dense stone". The hardness of the slate is also relatively high

1. The right machine should be selected for slate cutting. Because of its hard, thick, brittle, and large characteristics, it greatly improves the high requirements and high standards for processing equipment. The pure copper infrared bridge machine cuts easily cracked bricks, and cuts to the last corner. , High damage efficiency, solid selection is particularly important for processing, 3200 type slate bridge double-head CNC cutting machine is specially born for the slate cutting process.

、

The whole machine is made of national standard square steel, which is processed in one piece by a gantry milling machine. It adopts a high-speed motor to control the rotation of the machine head with frequency conversion. Single-knife cutting or multi-knife straight-edge cutting, the machine head has automatic lift compensation during the cutting process, and the ruler is automatically adjusted (advance and retreat) according to the preset value, which can process large ceramic slabs, slate, quartz stone, artificial stone, etc.

The difference between double-knife CNC bridge cutting machine and infrared bridge cutting machine:

1. Our machine gauge is driven by two servo motors. Many traditional ones are driven by one servo motor. Two servo motors are more stable than one servo motor; 

2. Our machine head adopts double cutter head design, trimming and cutting at one go, (cutting rock slabs can reach an amazing speed of 3 meters per minute, and traditional machines can only achieve 1.2 meters per minute) even cutting and repairing safety corners , One-time molding, better reduce the common problem of the industry that the cutting board is easy to fall off, and make the breakage rate lower; 

3. The machine head structure adopts separate lifting control, especially set two cutting modes, single-knife cutting or multi-knife cutting tasks, with automatic knife return and automatic advance and retreat by ruler positioning function; 

4. The whole machine adopts national standard square steel, which is processed in one piece by gantry milling machine, and adopts high-speed motor frequency conversion to control the rotation of the machine head, with high speed and low noise; 

5. No matter what machine is used for a long time, it will be deformed. We have considered this problem at the beginning of our design, and we use an adjustable design. Even if it is deformed later, it can be fine-tuned; 

6. The machine guide rail is the most critical part of a machine. We adopt the oil bubble design and have the protection of the organ cover, which greatly improves the service life of the machine; 

3. To cut slate products well, we still need to pay attention to some processing technology problems, reduce the phenomenon of bursting, fracture, edge collapse, and angle drop during the cutting process of slate, and improve the qualification rate and yield of slate products. 

-All diamond tools can be ordered and fabricated!
-Henry Wang | Quote Manager
-WhatsApp:+86-18030177538
-Email: Inquiry@zdiamondtools.com
-Web www.zdiamondtools.com