How to avoid the polishing wheel burst and burst debris injury accident?Here are a few suggestions:

1: strengthen the knowledge of safe use of polishing wheel

The use of safety training, the morning class will give the user to instill the knowledge of the safe use of polishing wheel, only to establish the knowledge of the safe use of polishing wheel, the user has this safety awareness can avoid the occurrence of polishing wheel burst injury accident.

2: strengthen the polishing wheel safety use inspection

The safety management personnel of the factory, the supervisor of the workshop and the team of the user should strengthen the safety inspection when the polishing wheel is used in Changping. When the polishing wheel surface is cracked and the deformation is serious, the user should stop the use of the polishing wheel in time.Urge employees to wear goggles if they do not wear goggles;When polishing wheel is used by other personnel nearby, employees are required to stay away from the operation area.

3: choose the regular manufacturer of polishing wheel products

Choose regular manufacturers of polishing wheel products, 35 manufacturers of safety is not guaranteed, out of the problem is difficult to investigate its responsibility.

4: check polishing wheel frequently

The user should frequently check the polishing wheel surface, especially in the spring wet, redundant environment to strengthen the polishing wheel inspection, timely find the security risks of polishing wheel.It is the management of the department that should treat the safety inspection of the polishing wheel as an important part of their daily work.

5: frequently replace polishing wheel

Pharmacy found polishing wheel surface crack, deformation, soft, thin must not because in order to save costs continue to use, to be replaced immediately, destroy, prevent the unwitting researchers continue to use, damage to them, a polishing wheel cost a few dollars, some employees for their own pay more, to change, polishing wheel cracking, become too thin is still used,But did not know the severity of the polishing wheel burst injury accident.Polishing wheel cracking, deformation should be replaced without hesitation and resolute replacement, but not penny wise and pound foolish, resulting in a lifelong regret of the accident.

6. Keep a safe distance

Keep a safe distance between this and the polishing wheel and do not have other people working near the working area.As long as the safe distance of the fish polishing wheel is ensured, and the use of polishing wheel bursting will not cause safety accidents.

7: Correct use of polishing wheel

The polishing wheel should be used to tighten the nut of the Angle mill, and the Angle mill should be installed with a safety cover.This kind of situation exists in the vast majority of stone processing enterprises, because the users of Angle mill think that installing safety cover will affect the writing operation.This is extremely dangerous;Polishing wheel storage should not be wet;Where there is much water, to prevent its softening and deformation before use;Check the polishing wheel surface frequently in use, and replace it in time if there is any problem;Do not press the contact surface of polishing wheel when used, especially in the case of polishing wheel grinding thin, more importantly, the hard crushing of the polishing wheel is easy to cause the burst of polishing wheel.The main users of polishing wheel pay attention to the use of safety, and according to the article described to comply with the execution, the use of polishing wheel accidents can be completely avoided, polishing wheel is small, once the accident caused by the trouble is not small, the use of safety alarm bells in the ear, in order to ensure safety!

-All diamond tools can be ordered and fabricated!
-Henry Wang | Quote Manager
-WhatsApp:+86-18030177538
-Email: Inquiry@zdiamondtools.com
-Web www.zdiamondtools.com